No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
CATEGORIES
Straumann® Bone Level(Tapered) Compatible
- NC AbutmentsNC Anatomic Abutments Straight 0° NC Anatomic Abutments Angled 15° NC Meso Abutments NC Cemented Abutments Φ3.5mm AH4.0mm NC Cemented Abutments Φ3.5mm AH5.5mm NC Cemented Abutments Φ5.0mm AH4.0mm NC Cemented Abutments Φ5.0mm AH5.5mm NC Multi Straight Abutments Φ3.5mm NC Multi Straight Abutments Φ4.6mm NC Multi Angled Abutments Angled 17° NC Multi Angled Abutments Angled 30°
- RC AbutmentsRC Anatomic Abutments Straight 0° RC Anatomic Abutments Angled 15° RC Meso Abutments RC Cemented Abutments Φ5.0mm AH4.0mm RC Cemented Abutments Φ5.0mm AH5.5mm RC Cemented Abutments Φ6.5mm AH4.0mm RC Cemented Abutments Φ6.5mm AH5.5mm RC Multi Straight Abutments RC Multi Angled Abutments Angled 17° RC Multi Angled Abutments Angled 30°
Quality Certificates
Standard Plus Implants Ф 3.3 mm- L 10mm (Narrow Neck Ф 3.5 mm)
011020
New
Head Diameter: 3.5mm
Neck Height: 1.8mm
Surface: S-L-A 10mm
Outside diameter of implant thread: 3.3mm
Inside diameter of implant thread: 2.8mm
By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of $ 1.00.
More info
 | ||
| Products Code Comparison | ||
|---|---|---|
 |  | |
| 011020 | 042.931S | |
Brand:  | Products Code for Order: 011020 |
| Head Diameter: 3.5 mm | Length: 10 mm |
| Material: Titanium | Neck Height: 1.8 mm |
| Package: EO(Ethylene Oxide) Sterilized | Surface: S-L-A (Sand-blasted, Large grit,? Acid-etched) |
Standard Plus implants 3.3 mm NN are small one-part implants for narrow interdental spaces and ridges with a minimal ridge width of 5.5 mm and a minimal mesio-distal gap width between adjacent teeth of 5.5 mm. As a general rule, always use the largest possible implant diameter.
Caution :
Placement in the molar region is not recommended.
>>>> DownLoad the Products Catalog of Bioconcept BC System for reference
※Guarantee for “Bioconcept” Dental Implants
| We guarantee that all our dental implants will be free replaced after implanting without any reason, whole life guarantee, based on the conditions as below, 1.Original implant packing and label is needed; 2.A document "Customer Feedback Records" should be filled in. |  |
Data sheet
| Raw Material: | Titanium |
| Package: | EO(Ethylene Oxide) Sterilized |
| Surface: | S-L-A (Sand-blasted, Large grit,? Acid-etched) |
| Length: | S-L-A 10mm |
| Head Diameter: | 3.5mm |
| Neck Height: | 1.8mm |
| Size No. | Z35/18/33/10 |
